|
|
|
Click HERE to order Gift Certificates.
Click HERE to check estimated delivery time for your order.
We only ship to U.S. addresses.
|
1/2" Shower Head Arms and PipesFree shipping to U.S. address.
10" & 15" Locking Brass Extension Arms
Click on pictures to enlarge.
Locking Brass Extension Arms - our locking extension arms are designed to hold even very heavy shower heads like our giant 9" Country Club RainStorm Shower Head or the Giessdorf 8 Jet Shower Head. Since these arms lock into place, they must be loosened and re-tightened every time you move the shower head up or down. This should be done with the water turned off. We do not recommend this extension arm except for heavy shower heads or handheld showers.
The above pictures show the internal locking cogs and the wingnut locking screw. To adjust the height of the extension arm you must: turn off water, loosen wingnut approximately 1/2 turn, move extension arm to desired height, re-tighten wingnut. Both of the joints are locking joints. When you raise or lower the shower head this will change the angle that the shower head sprays. You must also loosen the 2nd wingnut, adjust the angle of the shower head, and then re-tighten the wingnut.
While the locking brass extension arms are perfect for many customers, you may want to look at our washerless brass extension arms listed below. Pictured above are the 2 sizes of locking extension arms and the washerless brass extension arm (bottom ext. arm in photo). PLEASE READ BEFORE ORDERING THIS EXTENSION ARM - The wingnut is held in place by a stainless steel locking screw (see photo above.) This prevents the wingnut from being backed off more than 1 turn. If you try to force the wingnut to back off further than is necessary, it is possible to exert enough force and break this screw. NEVER force the wingnut further than it what easily backs off to. The locking mechanism is designed this way so that the wingnut cannot be backed off too far and the extension arm cannot come apart when simply raising and lowering the shower head. Free shipping to U.S. address.
Having trouble placing your order with our shopping cart? Try placing your order using our secured order form: ORDER FORM. Extension shower arms are made out of brass. Brass is not a hard metal like steel. If you try to tighten an extension arm using the arm as a wrench or lever, it will bend. We hand inspect every extension arm we send out and package them carefully to prevent shipping damage. Bent arms are not returnable for refund or exchange.
8" & 10" Adjustable Washerless Brass Extension Arms
(Shower heads not included.) O-Ring Brass Extension Arms - designed to get tighter than most extension arms so they can hold a heavier shower head* without drooping or leaking. Easily raise or lower your new or existing shower head. If you need more extension, look at the double extension arms listed further down this page.
Most adjustable extension arms currently being sold have internal fiber washers as shown in the above photo (right photo). These extension arms are okay for lightweight shower heads and light usage but cannot be used with heavier shower heads. The fiber washers get compressed and wear out with use. Before long they are leaking and can't be tightened enough to stop them from drooping. Our washerless brass extension arms have no internal washers, only common o-ring seals. The more you tighten the wingnut, the tighter the joint gets. No leaks, no drooping. *(Not recommended for shower heads exceeding 3 pounds - Giessdorf 8 Jet, Country Club RainStorm, 6" or 10" Luxury or 12" Euro.) See compatibility table for recommended shower heads. Free shipping to U.S. address.
Having trouble placing your order with our shopping cart? Try placing your order using our secured order form: ORDER FORM. Extension shower arms are made out of brass. Brass is not a hard metal like steel. If you try to tighten an extension arm using the arm as a wrench or lever, it will bend. We hand inspect every extension arm we send out and package them carefully to prevent shipping damage. Bent arms are not returnable for refund or exchange.
9" Adjustable Brass Extension Arms
Brass Extension Arms - quickly and easily raise or lower your existing shower head. These are our standard duty adjustable extension arms. They are suitable for shower heads up to approximately 1 pound*. *(Not suitable for the following shower heads: Giessdorf 8 Jet, Giessdorf 6 Jet, 3" Adjustable Brass, 8" or 12" Euro, 6" or 10" Luxury, Octopus, 6" or 10" Euro Can Style, 9" Country Club RainStorm, Aussies with extensions or any other large/heavy shower heads.) See compatibility table for recommended shower heads. Free shipping to U.S. address.
Having trouble placing your order with our shopping cart? Try placing your order using our secured order form: ORDER FORM. Extension shower arms are made out of brass. Brass is not a hard metal like steel. If you try to tighten an extension arm using the arm as a wrench or lever, it will bend. We hand inspect every extension arm we send out and package them carefully to prevent shipping damage. Bent arms are not returnable for refund or exchange.
Double Brass Extension Arms
Double Brass Extension Arms - perfect when a single extension arm isn't enough. These brass extension arms (shower head not included) feature washerless joints (no friction washers) that get tighter than washered extension arm joints. The joints use common o-rings to prevent water from leaking out. They are suitable for shower heads up to approximately 2 pounds*. The arms are 9" each for a total of 18" of extension. Adjust your shower head up, down or out. Perfect for everyone in the family from the tallest to the shortest. Available in chrome, brushed nickel and titanium gold (PVD). *(Not suitable for the following shower heads: Giessdorf 8 Jet, 3" Adjustable Brass, 12" Euro, 6" or 10" Euro Can, 6" or 10" Luxury, 9" Country Club RainStorm, Octopus, Aussies with extensions.) See compatibility table for recommended shower heads. Free shipping to U.S. address.
Having trouble placing your order with our shopping cart? Try placing your order using our secured order form: ORDER FORM. Extension shower arms are made out of brass. Brass is not a hard metal like steel. If you try to tighten an extension arm using the arm as a wrench or lever, it will bend. We hand inspect every extension arm we send out and package them carefully to prevent shipping damage. Bent arms are not returnable for refund or exchange.
10" Adjustable Heavy Brass Tri-Star Extension Arms
Brass Extension Arms - quickly and easily raise your existing shower head up to 10 inches higher than it's current height, then immediately drop it down up to 10 inches, almost 3 feet of adjustment. These heavy duty, solid brass extension arms come in a 10 inch or 15 inch length and will work with any shower head up to approximately 1.5 lbs* in weight. They feature our exclusive tri-star tightening nuts with the extra large joints for trouble free service. (*Not suitable for the following shower heads: Giessdorf 8 Jet, 10" SoftJet Euro, 9" Country Club RainStorm, Luxury, Can Style, or Aussies with extensions. Order the 10" Locking Extension Arm for heavy or oversized shower heads.) (The o-ring does need lubrication. Click here for simple instructions. Use a soft cloth over the tri-star nut and hand tighten firmly. The larger the head and the longer the extension arm, the tighter the nut has to be. It will not tighten properly if the o-ring is not thoroughly lubricated.)
The above picture shows the difference in joint and washer size between the heavy brass extension arms and the standard weight extension arms listed below. Because of the larger joints, the main friction washer has over twice the surface area allowing for a tighter grip and less wear. The brass tube is also thicker gauge. Available in Titanium Gold (PVD) finish only. These extension arms have been discontinued by the manufacturer. Please check out our 10" Washerless Extension Arms. Free shipping to U.S. address.
Having trouble placing your order with our shopping cart? Try placing your order using our secured order form: ORDER FORM. Extension shower arms are made out of brass. Brass is not a hard metal like steel. If you try to tighten an extension arm using the arm as a wrench or lever, it will bend. We hand inspect every extension arm we send out and package them carefully to prevent shipping damage. Bent arms are not returnable for refund or exchange.
'S' Riser Pipes
Brass 'S' Pipe - You may want to simply unscrew your old shower head and screw your new shower head right onto your existing shower pipe, not a problem. Or you may want to raise your shower head up 8 inches or 10 inches by replacing your old shower pipe with a new brass 'S' Riser Pipe. Comes with escutcheon. Standard 1/2" pipe thread on both ends. Perfect for even the heaviest shower heads.
Shower head not included. Please note: you must have a minimum of 12" (14" with 10" riser) of clearance in a full circle around your water outlet in order to install an 'S' riser pipe. Free shipping to U.S. address.
Having trouble placing your order with our shopping cart? Try placing your order using our secured order form: ORDER FORM.
Riser/Extender Brass Shower Arm |
| Description | Color | Web Site Special | Click to buy |
| Riser/Extender Arm | Chrome | $49.95 | 
|
| Riser/Extender Arm | Brushed Nickel | $64.95 | |
| Riser/Extender Arm | Titanium Gold | $84.95 | |
Having trouble placing your order with our shopping cart? Try placing your order using our secured order form: ORDER FORM.
Hi-Rise Shower Arm - Gracefully curved shower head arms to raise and extend your oversized shower head out into your showering area. These brass arms are standard 1/2" threading and come with a pipe nipple and matching escutcheon. They measure approximately 17 1/2" high. (Please note: you must have a minimum of 18" of clearance in a full circle around your water outlet in order to install a Hi-Rise arm.) When installed, the pipe outlet is approximately 17" away from the wall and 8" higher than the wall outlet. All of our shower heads have swivel joints on them so they can be tilted in any direction. Keep in mind that this long of an arm has a lot of leverage. Caution should be used when installing a heavy shower head (such as our 9" Country Club RainStorm Shower Head) on to the Hi-Rise. The combination of the weight and someone pulling on the heavy shower head for any reason may bend the pipe.
Free shipping to U.S. address.
| Description | Color | Web Site Special | Click to buy |
| Hi-Rise Shower Arm | Chrome | $49.95 | |
| Hi-Rise Shower Arm | Brushed Nickel | $64.95 | |
| Hi-Rise Shower Arm | Titanium Gold | $84.95 | |
Having trouble placing your order with our shopping cart? Try placing your order using our secured order form: ORDER FORM.
Click on pictures to enlarge. 
Shower head not included.
1/2" Brass Pipe Nipples - for flush mount installation and drop-down ceiling mount. Available in 2" and 6" lengths.
Free shipping to U.S. address.
| Description | Color | Web Site Special | Click to buy |
| 2" Pipe Nipple | Chrome | $4.95 | |
| 2" Pipe Nipple | Polished Brass | $5.95 | |
| 6" Pipe Nipple | Chrome | $8.95 | |
| 6" Pipe Nipple | Polished Brass | $9.95 | |
Having trouble placing your order with our shopping cart? Try placing your order using our secured order form: ORDER FORM.
Click on pictures to enlarge.
Our Euro Brass Shower Arm - will add a European flair to your shower. 6 1/2" long and made from solid heavy brass (shower head not included.) Comes in your choice of designers finishes: Chrome, Titanium Gold (PVD) or Brushed Nickel.
Simply unscrew your old shower arm pipe from the wall, screw in the brass pipe nipple (included), and hand tighten the Euro Shower Arm onto the nipple. Works with any standard 1/2" straight threaded washered shower head. See compatibility table for recommended shower heads.
Free shipping to U.S. address.
| Description | Color | Web Site Special | Click to buy |
| Euro Brass Shower Arm | Chrome | $39.95 |
|
| Euro Brass Shower Arm | Brushed Nickel | $49.95 |
|
| Euro Brass Shower Arm | Titanium Gold (PVD) | $59.95 |
|
Having trouble placing your order with our shopping cart? Try placing your order using our secured order form: ORDER FORM.
Click on pictures to enlarge. 
Heavy Brass Shower Arms - add a touch of class to your shower. This 7" heavy cast brass shower arm (shower head not included) attaches easily to your existing plumbing. Simply unscrew your old shower arm pipe from the wall, screw in the brass pipe nipple (included), and hand tighten the Deluxe Shower Arm onto the nipple. Works with any standard 1/2" threaded shower head. Available in powder-coat white.
Free shipping to U.S. address.
| Description | Color | Web Site Special | Click to buy |
| Heavy Brass Shower Arm | Chrome | $39.95 | Out of stock |
| Heavy Brass Shower Arm | White | $29.95 | |
Having trouble placing your order with our shopping cart? Try placing your order using our secured order form: ORDER FORM.
Click on picture to enlarge. 
Brass Shower Pipes - standard 5 1/2" gooseneck with 1/2" pipe tread on both ends. Comes with matching escutcheon in chrome or polished brass.
Free shipping to U.S. address.
| Description | Color | Web Site Special | Click to buy |
| Standard Shower Pipe and Wall Flange | Chrome | $4.95 | |
| Standard Shower Pipe and Wall Flange | Polished Brass | $6.95 | |
Having trouble placing your order with our shopping cart? Try placing your order using our secured order form: ORDER FORM.
Shower head comparison table, click here. (New window will open.)
Shower head / shower arm compatibility tables, click here. (New window will open.)
Shower finishes, click here. (New window will open.)
Shower head installation instructions, click here. (New window will open.)
Shower head customer testimonials, click here. (New window will open.)
Shower head cleaning instructions, click here. (New window will open.)
|
NEATitems.com, LLC, # 156, 2370 W. Hwy 89A Suite 11, Sedona, AZ 86336-5341 Please email any questions regarding products or an order already placed to: info@NEATitems.com Phone orders, please email Christina@NEATitems.com with your full name, shipping address and phone number for a return call. We do have a phone number but it is not located in our warehouse with us so you will almost ALWAYS get our voice mail. Please speak slowly and clearly when leaving a message, or better yet, email us or fax us for a faster response. 800/767-5549 561/760-2447 fax info@NEATitems.com email Return Policy Click here *Free Shipping Click Here Privacy Statement Click Here Who are we? Click Here WARNING! Spoof NEATitems.com emails!! Click here For more neat items check out BlueMoonGoods.com Click here © Copyright 1997-2008 NEATitems.com, LLC |
